湖南楼梯间前室压力传感器生产厂优惠报价「豪鲁邦空调」

电梯前室压力传感器

依据GB50016《建筑设计防火规范》、GB50045《高层民用建筑设计防火规范》，防烟楼梯间内机械加压送风防烟系统的压力值应为40Pa至50Pa，前室、合用前室、消防电梯间前室、封闭避难层（间）为25Pa至30Pa，设置压力监控系统；

2、当防烟楼梯间或前室压力达到超压监控值时，前室和楼梯间的压力传感器发出报警信息，压力传感器打开受控加压风机风管上的电动旁通阀用于泄压,压力达到正常区间值后，压力传感器发出信号，压力传感器关闭旁通阀，可通过控制风阀执行器的开启角度来保持压力值稳定在规范要求的范围内；

压力传感器

压力控制系统可通过控制旁通阀的开闭，将机械加压送风系统的压力值有效控制在要求的合理范围内-----防烟楼梯间40-50Pa，前室、合用前室、消防电梯间前室、封闭避难层(间)为25-30Pa。The pressure control system can effectively control the pressure value of the mechanical pressurization air supply system within the reasonable range required by the national standard-40-50 PA in the smoke-proof Stairwell by controlling the opening and closing of the by-pass Valve, the front room, the shared front room, the front room of the fire elevator room and the enclosed refuge floor (room) are 25-30Pa.

Product Features are: 1: The use of sensing technology, core components imported core body. 2: And Directly Change The sensor signal into changeable passive switch signal with microprocessor circuit. 3: Output Action Point * * * , High repeatability. 4: This product with new technology to reset the process can be any user requirements.

产品特点有:

1:采用传感感应技术,部件采用国外进口芯体.

2:并用微处理电路直接把传感器信号变成可更改的无源开关量信号.

3:输出的动作点***,重复性高.

4:本产品着新技术让复位过程均可按用户要求任改动.